This polyester safety glove is made up of a water repellent fiber and 3M Thinsulate Insulation for weather conditions up to -20 degrees with elasticated cuffs for a more comfortable fit.
Made up of wool, these gloves protect against the cold.
These gloves feature elastic cuffs for a more comfortable fit.
Whether you are braving the elements outdoors or working in temperature control conditions inside, these gloves will protect you from the cold.
High performance polyethylene support. Thermoplastic (TPR) reinforcement on back and fingertips. Smooth nitrile coating/foam nitrile on palm and fingertips. Embossed inside reinforcement on palm. Kevlar® thread on all the seams. Support: High performance polyethylene fibres.Coating: nitrile.Back reinforcement: TPR.Reinforcement on thumb/forefinger: PVC. Double nitrile coating for oily work Flexible reinforcements Reinforcement between the thumb and index finger and on the palm Protection against impact in the metacarpal area. After an energy impact of 5J, the force transmitted to the back of the hand cannot exceed 4 kN Available only with header card Very good abrasion and cut resistance Increased lifespan Kevlar®...
Inside: 100% acrylic gauge 10. Outside: 100% polyamide gauge 15. Full latex coating of the hand. Second foam latex coating on palm and fingertips.Support: polyamide/ acrylic.Coating: Latex.COLOURBlue-Black
Available only in Large Size
BM Maeiz Mechanical gloves are made from leather. Material is durable as well as versatile and is known to provide a balance of durability, dexterity, abrasion resistance, and comfort. Also enables gloves to have better control and movement when working on heavy jobs.
These Cotton Seamless Hand Gloves with PVC Dots are designed to provide protection to hands during a variety of heavy applications and is used extensively on worksites. It offers for maximum safety and is highly durable.
ECONOCUT high performance fibre. Polyurethane coating on palm and fingertips. Gauge 13. Bag of 3 pairs.
Support: ECONOCUT high performance fibres.
Coating: PolyurethaneCOLOUR : Grey
Cut level D
REGULATION (EU) 2016/425EN ISO 21420:2020 General requirementsEN388:2016+A1:2018 Protective gloves against mechanical Risks (Levels obtained on thepalm)4: Resistance to abrasion (from 1 to 4)X: Resistance to cutting (from 1 to 5)4: Resistance to tear (from 1 to 4)2: Resistance to puncture (1 to 4)D: Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)USA STANDARDSANSI-ISEA 105:2016 Hand protectionA4: Resistance to cutting by sharp objects (from A1 to A9)
SOLUTION FOR WIDE RANGE OF HANDLING AND CARRYING APPLICATIONS
Features
Cotton liner delivers flexibility and comfortable
Sure grip in dry and wet environments
Open back reducing perspiration build-up
Elasticated wrist for a secure fit
Standards - CE Certified - EN 388:2016 - 2121X
Only Available in Bulk Requirements
Water-repellent cowhide full grain leather. Aluminized polyester insert. Cowhide split leather cuff. Hand andcuff in synthetic. American assembly. 20 cm cuff. Length: 40 cm.Full grain water-repellent cowhide leather (TECHNICUIR).Thickness of between 1.1 and 1.3 mm.Insert aluminised polyester.Synthetic lining.Split cowhide leather cuff.Kevlar® sewn.Certifications and Standards REGULATION (EU) 2016/425EN420:2003+A1:2009 General requirements2: Dexterity (from 1 to 5)4/4 >180 mn: Waterproofing : Ability of the glove to withstand the penetration ofwater, moisture. EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)2: Resistance to abrasion (from 1 to 4)2: Resistance to cutting (from 1 to 5)2: Resistance to tear (from 1 to 4)2:...
BM Palm gloves are made from top grain Chrome leather. Material is durable as well as versatile and is known to provide a balance of durability, dexterity, abrasion resistance, and comfort. Also enables gloves to have better control and movement when working on heavy jobs.
This Leather Working Gloves provide for the maximum safety and are used extensively on worksites. These gloves are very comfortable and durable.
Only for Women
